JIS G3463 SUS304TB, SUS309TB, SUS310TB, SUS312LTB, SUS316LTB Stainless Steel Tubes for Boiler and Heat Exchanger
Material
The JIS G3463 standard specifies the requirements for stainless steel tubes used in boilers and heat exchangers. The materials covered under this standard include various grades of stainless steel, each offering unique properties suitable for high-temperature and high-pressure applications.
Specification
The specification outlines the dimensions, tolerances, and mechanical properties required for stainless steel tubes. These tubes are primarily used in the construction of heat exchangers, boilers, and other pressure vessels.
Key Features
- Corrosion Resistance: Excellent resistance to oxidation and corrosion, making them suitable for harsh environments.
- High-Temperature Strength: Maintains strength and stability at elevated temperatures.
- Weldability: Good weldability, allowing for easy fabrication and assembly.
- Durability: Long service life with minimal maintenance.
Chemical Composition
The following table presents the chemical composition of the various stainless steel grades covered under JIS G3463:
| Grade | C (%) | Si (%) | Mn (%) | P (%) | S (%) | Cr (%) | Ni (%) | Mo (%) |
| SUS304TB | 0.08 | 1.00 | 2.00 | 0.045 | 0.030 | 18.00 | 8.00 | - |
| SUS309TB | 0.20 | 1.00 | 2.00 | 0.045 | 0.030 | 22.00 | 12.00 | - |
| SUS310TB | 0.25 | 1.00 | 2.00 | 0.045 | 0.030 | 25.00 | 20.00 | - |
| SUS312LTB | 0.03 | 1.00 | 2.00 | 0.045 | 0.030 | 18.00 | 8.00 | 2.00 |
| SUS316LTB | 0.03 | 1.00 | 2.00 | 0.045 | 0.030 | 16.00 | 10.00 | 2.00 |
Mechanical Properties
The mechanical properties of the stainless steel tubes are crucial for their performance in high-pressure and high-temperature applications. The following table summarizes the key mechanical properties of the grades:
| Grade | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation (%) | Hardness (HRB) |
| SUS304TB | 205 | 515 | 40 | 90 |
| SUS309TB | 210 | 520 | 35 | 95 |
| SUS310TB | 210 | 520 | 30 | 95 |
| SUS312LTB | 220 | 530 | 40 | 90 |
| SUS316LTB | 220 | 530 | 40 | 90 |
Steel Grade
The steel grades specified in JIS G3463 are designed to meet the requirements of various applications in the boiler and heat exchanger industries. Each grade has been formulated to provide specific properties that enhance performance and durability.
Application
These stainless steel tubes are widely used in:
- Boilers: For steam generation and heat transfer.
- Heat Exchangers: For efficient heat transfer between fluids.
- Pressure Vessels: To withstand high pressure and temperature conditions.
- Chemical Processing: In environments where corrosion resistance is critical.
Possible Alternative Grades
While the JIS G3463 grades are widely used, there are alternative grades that may be considered based on specific application requirements:
- SUS430: Ferritic stainless steel, suitable for moderate corrosion resistance.
- SUS321: Stabilized austenitic stainless steel, offering better resistance to intergranular corrosion.
- SUS347: Austenitic stainless steel with improved resistance to corrosion at high temperatures.
TORICH Group, an one-stop service provider of raw materials engaged in raw material production, R&D and
trade, has 30+ years of experience in the market, exported to 56 +countries, and won good reputation and
credibility among domestic and foreign customers.
The company's production plant covers an area of over 10,000 square meters, with an annual production
capacity of 50,000 tons of materials and a comprehensive trading and warehousing capacity of 100,000 tons, which can satisfy customers' personalized needs for raw materials in terms of diversity and timeliness.
The group holds shares in more than ten domestic production entities, whose main products include
seamless steel pipes ( carbon steel and stainless steel), welded pipes ( carbon steel and stainless steel), pipe fittings ( carbon steel and stainless steel), titanium (titanium tubes, titanium rods, titanium cakes, titanium plates, etc.), aluminum (aluminum tubes, aluminum rods, aluminum die casting, aluminum casting, CNC machining), and CNC deep processing of metal materials such as tubes, rods, and casting parts.
Over the past 30 years, the company has been gradually developing new technologies and materials to meet
the growing needs of customers and various diversified needs, exporting to more than 56 countries and still
increasing the number of exporting countries, aiming to help customers to solve the demand for raw materials, and to facilitate one-stop purchasing for customers.
Q: Are you trading company or manufacturer ?
A: manufacturer,also can do trading.
Q: How long is your delivery time?
A: Generally speaking,it is 10-15 days if the goods are in stock,or it is 30-40 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples? is it free or extra ?
A: Yes, we could offer the sample for free charge but need pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=2000USD, 100% in advance. Payment>=2000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact with me.
Product Tags:
|
|
JIS G3463 SUS304TB Stainless Steel Tubes For Boiler And Heat Exchanger Images
|
